Balstar HF Automatic Automatic Auto 1800 Watt

a solid automatic tuner designed for high power - is it possible? Balstar shows us how it is done! {

The tuner talstar "HF - Auto" is capable of a maximum nominal power of 1800 watts (two in the 200W vector power during optimization). There are no ticking relays or step-by-step switches used in the device, but the continuous variation components, such as a roller inductor or a large plate condenser to ensure perfect correspondence every time. {

with high power does not mean that it is not possible to use QRP, too much! The Balstar HF -Auto starts tune with 2 watts already! With the built-in microprocessor harmony it requires only 10 second peaks, but usually also less (3-5 seconds). The large and well legible LCD display shows the settings of the tuner, such as C and L The Settings, SWR, selected antenna exit and more. The LC -Splay makes the operation of the device very simple, a simple menu system allows you to easily set various parameters. {

The HF -Auto provides three arbitrary antenna outputs selected manually or automatically depending on the frequency. Alternatively, the tuner can be switched in "bypass" mode to deactivate it. Once you find the settings for good SWR can be automatically saved, which makes optimization next time even faster. The serial interface is used to update the firmware, an included serial cable. Balstar plans to launch a remote controlled version of this tuner, but a release date is not yet available. It requires 12V power supply, a DC cable with a tuner connector is included. {

A Solid Automatic TUNER DESIGned for High Power Rating - Is that possible? Balstar Shows US How It's Done! {

The Palstar "HF-Auto" tuner is capable of a Maximum power rating of 1800 Watts (2 to 200w Carrier Power When Tuning). There are no clacking relays or steppe switches used in the device,but continuously variable components like a roller indittor or a large plate capititor to ensence for a perfect match every time.

high power rating does not mean that you can't use qrp, too! Thestar HF-Auto Starts Tuning With 2 Watts Almedy! With the Built-in Microprocessor Tuning Only Takes 10 Seconds Tops, But Usually Even Less (3-5 Seconds). The Large and Well Legible LC-Splay Shows Settings of the Tuner Like C and l settings, Swr, Selected Antenna Output and More. The LC-SPLAY MAKES OPERATING The Device Very Easy, A Simple System Helps to set Various Parameters Easily.

the hf-car provides three arbitrary antenna outputs that are selected either manuary or automatic depending on the frequency. Alternatively the tuner can be switched to "bypass" mode to deactivate it. Once Settings for Good Swr Are Found they can be saved Automatically, Which Makes Tuning Next Time Even Faster. The serial interface is used to upgrade the firmware, to serial cable is included. Balstar Plans to Launch a Remote-Controlled Version of this Tuner, However a Release Date is not Available Yet. Power Supply Requires 12V, A DC Cable With a Connector for the Tuner Is Included

• {
• Included in Delivery of Balstar Tuner 'HF-Auto' {
• Tuner
• serial cable subd 9pol. { {
• DC Cable {
• Manual English {

Only The Coax Cable is Needed to Connect Radio and Tuner! No Other Connections necessary.

only the coaxial cable for radio and tuner connection is required! No other the necessary connections.