Italiano
Français
Español
- Out-of-Stock
Balstar at 500
- Write a review
€827.18
Tarstar with traditional high quality and functionality set is now also available for low power. The compact tuner Balstar AT-500 can manage Max. 600W transmission power. {
{{ The 'Tarstar AT-500 manual tuner is suitable for all bands from 160 to 6m. It uses a differential capacitor and a precision roller inductor for tuning. In Built-in 4: 1 Balun allows operation with balanced power lines and coaxial cables. The development is very easy to manage, because only two checks (C, L) must be tuned. The roller inductor can be used up to 6 meters, for 160m operation of an additional inductance is on. {
{The tupering tuner AT-500 has a cross-needed needle tool (backlit), which also offers a Peak Hold function. The measurement field can be switched from 300 to Max. 1000W. A 6 -position switch is used to commute between 2 coaxial cables, directly or via the tuner, a balanced line or bypass. {
{{
Included in the Tarstar AT-500 expedition
- {
- tuner {
- cable dc {
- Instructions in English {
{
{
| AT-500 | |
|---|---|
| Mass. (exit) | 600 Watts Pep (500w CW) |
| HF Band | 6m - 160m |
| Tuning | 1x Differential Capacity, 1x Roller inductor |
| Antenna Switch 2 { | 2 Antennas, Bypass, Wire Antenna |
| Capacity | differential capititor 14 - 360pf @2.5 KV |
| Roller inductor 2 td> { | 15 µH |
| impedance range (1.8-30mHz) | 20 - 1500 Ω |
| Instrument | Cross Needle, Peak/Peak Hold, Backlit |
| Measurement Ranges 2 td> { | 0-300 / 0-1000 Watt |
| Balun | 4: 1 |
| Houses | Aluminium, Hot Dip Galvanized, Partially Pulver Coated |
| size (t × b × h) | 327mm × 263mm × 140mm |
| Weight | 3.6kg |
AT-500
Data sheet
- MPN
- 7438641839230
- Sku
- AT-500
New
All product reviews comply with DIRECTIVE (EU) 2019/2161
