Balstar at 4k 4kw manual tuner

If you really want to get a lot of power to the antenna, then the Talstar AT- 4K is the right tuner. This is the tune tuner has become well known for and has since been continually improved. The tuner has a max. Power of 3000W PEP (2500W CW) (real loads). The high quality components are designed for a long duration, as both variable capacitors are specified for 6 kV, the roller inductor and pass up to Max. Power 10a hf. The use of three T -Matching checks (2x variable capacitors, roller inductors 1x) makes it possible to develop very precise and very well. { {
In addition, the Talestar at - 4K has a Balun 1: 1 commutable on the entrance of the tuner. Filars antennas or open wire in this way ENDD-FED can be tuned directly. Balun is lit by a relay front panel. As with all the great tuning from Talstar, the AT- 4K has a large cross-ago display with backlight. Metro range from 300 to 3000W provides instantaneous over and back panoramic power as well as the resulting SWR. The tool has a 'Peak and Hold' function to read the most accurate and easier peak values. Nutrition requires 12V, max. 200ma. {

When you really Want to Get a Lot of Power to the Antenna, then the talstar at-4k is the right tuner. This is the tuner talstar has become well-known for and it has ever ever since been continuously impverted. The Tuner has a Max. Power Rating of 3000w Pep (2500w CW) (Real Loads). The High-Quality Components Are Designed for Long Durability, As Both Variable Capitors Are Specfied for 6kv, The Roller inductor and Switch up to Max. 10a hf power. The Use of Three Controls in T-Matching (2x Variable Capitors, 1x Roller indiffer) Makes Very precise and fine Tuning Possible.

Additionally The Talestar AT-4K HAS A Switchable 1: 1 Balun at the input of the tuner. This Way End-Fed Wire Open Wire Antennas Can Be Tuned Directly. The Balun is Switched on by Front Panel Relays. As with all large tuners from Balstar,The AT-4K HAS A Large Cross-Needle Display With Backlighting. Switching meter range from 300 to 3000w Provides Instant Ovserview of Forward and Reverse Power As Well As the Resulting Swr. The Metter has a 'Peak and Hold' Function to Read Peak Values ​​More accurate and Easier. Power Supply Requires 12V, Max. 200ma.

• {
• Included in Delivery of Balstar Tuner 'AT-4K' {
• tuner {
• DC Cable {
• Manual English

Only The Coax Cable is Needed to Connect Radio and Tuner! No Other Connections necessary.