ICOM IC-7300mk2 HF transceiver

{

ICOM IC-7300mk2 Remotetering HF All-Mode compact for HF/50 MHz; The European version also includes { 5 mHz {004 004} 005} {{} and {005 005} {} 70 MHz {{{{{{{{{{{{{{{{{{{{H004 {{{{{{th # Porta significant updates to reception/transmission, connectivity and efficiency. {

{

{

{

novelty of the MK2 - In short

• {
• {

  Improved RMDR (≈ 105 dB at 2 kHz) and significantly lower phase noise noise (typ. −139 DBC/Hz)

  {
• {

  HDMI ™ exit for external monitor with spectrum/waterfall (optional audio)

  {

• integrated CW decoder - decoding of the Morse without PC

  {
• {

  rx-antenna in/out (SMA) for separate RX routes, filters or preamplifiers

  {
• {

  USB-C with two more audio commes commers (e.g. ft8 and logging in parallel)

  {
• {

  via Lan with RS-BA1 (V2, optional, sold separately) -including remote ignition/shutdown, without PC server

  {
• {

  RX current in standby reduced (≈ 0.7 a) for less heating

  {
  {

unchanged operating logic

The interface is identical to that of the IC-7300. Menu, touch control and work flows remain in the same points, reducing re-training and errors in Club or multi-user stations.

{

Reception and transmission

greater robustness to the strong signals thanks to the highest eart; The phase noise in TX decreases (typ. −139 DBC/Hz a 1 kHz). In practice: less influence of adjacent canal channels and more "clean" transmitted signals. The RMDR ({ mutual mixing Dynamic Range ) indicates immunity to mutual mixing due to the phase noise of the oscillator in the presence of strong adjacent signals.

{

efficiency and thermal

The RX current in standby drops from 0.9 to 0.7 a (tip.). Less dissipation means less heat and more stable prolonged sessions (contest).

{

Display and decoder

{
L output HDMI ™ allows you to show frequency, spectrum/waterfall, menu and, if desired, audio on a large external monitor.The integrated CW Decoder reads the Morse without PC; filtering and speed are adjustable.

rx paths and connectivity

rx-antenna in /out (SMA) separated allow dedicated RX antennas, closet or preamplifiers filters. With USB-C , two more audio commes commeri allow, for example, FT8 and logging via a single cable.

remote operations

lam Simplifies remote control: with RS-BA1 (version 2, optional, sold separately) the transceiver is manageable via the network/Internet- Including ignition/shutdown - without PC server in the station. Required network access and DC Power Continue.

{

bands and variants

{

The European version also supports the new band 5 MHz and 70 MHz . Note: pre-production information; The specifications can change before the shipment. {