CG ANTENNA SB 2000 MK2 USB Digital ways interface

{

new version! { { {

{{} SB-20000 interface for digital ways type ft8 {005 007}

{{{{{{{{{{{{{{{{{{{{{{ # 'Mk2' of the SB-20000 interface now supports two virtual serial doors! This is very useful as not all computer programs capable of supporting mixed functions such as PTT and CW, more cat on the same serial door. With the new version you have two virtual serial doors, one for PTT and CW / FSK, and another door for cat.sb-20000 mk2 control: audio card and controlled Cat interface via USB.  { {

SB-20000 MK2 is an economical radio interface with USB connector. (USB 1.1 and USB 2.0 Full Speed ​​are supported). There is no longer needing to have serial and parallel doors on your computer. The interface allows control of the PTT, FSK and CW manipulation via Cat and the interface for the audio card for digital ways: RTTY, PSK32, SSSV, Fax etc. (using your computer's sound card). { { {002 002}

{{{} If you want more cables the cost of the single cable is € 19.00 {{} {

{{{{{{{{{{{{{{{{H001 {{{{{H001 { # { {

• {{} sb2k-IC13 for all with Acc-13: IC-718, IC-703, IC-7000, IC-7100 { { {

• {{} SB2K-IC8 for all ICOM with Acc-8: IC-746, IC-7400, IC-756xxx, IC-7600, IC-7700, IC-7800 and practically all the most recent of the ICOM Desktop Radio {{

• {{{{{

SB2K-KW8 {} for Kenwood for Kenwood Ts-480sat and ts-480hx

• sb2k-kw13 for Kenwood TS-570 and TS-20000

• SB2K-FTMINI8 for yaesu ft-100, ft-817, ft-857,

sb2k-ft450 for yaesu ft-450, ft-950, ft-dx1200, dx3000-ft sb2k-ft2000 for yaesu ft-1000M FT-DX5000, FT-DX9000 note: radio that support hf and vhf (for example IC-746, IC-7400) have separated ptt lines for HF (HSend) and VHF (VSndend). The SB-200 keys only the HSEnd line, therefore without changes it can only be used on HF. To use the interface in VHF / UHF like this, you need to change the radio connector or interface for HSEND and VSENDED SIMULTANUSLY key (HSEnd and Vsend). Radio such as the IC-706MK2G and IC-7000 needs to have a menu set, in order to also HSEND TX in VHF and UHF. Style = "Font-Size: 14px;">: the cable sb2k-ic13 has an internal bridge between the lines of coding for fsk for fsk for fsk for fsk and cw. In this way the precaution with a single line, the RTS signal, and works well with the IC-706, IC-7200 etc. but with the IC-7000 a high current is seen on these lines. The effect is that the fan starts immediately after connecting the cable. In rare cases the IC-7000 could be damaged. Quick solution: do not insert the CW connector from the SB-20000 to the IC-7000. The interface makes it unusable for telegraphy. Other modes such as PSK31, RTTY etc. are not interested. 

all signals are disacked galvanically by means of transformers. The power supply is taken from the USB port of the computer. In the package you will find the CD with USB drivers for Win 2000, XP, Vista and Win7. Mac Osx and Linux are supported without any driver installation. Dimensions: 130x75x45mm. {

the cables kit (sold separately) contains all the cables necessary to connect to the radio (cat and data, USB and audio for the computer). The SB-20000 MK2 includes a level converter from RS-232 to USB, allowing the use of radio equipment equipped with RS-232 interface (FT-1000, FT-450, FT-950 etc.). The connection with the radio is made with a cable that now allows CW manipulation. { { {

In the notes of the order indicates a (1) only cable for your radio 002} {

{{{} {

{{{{{{{{{{{{{{{{{{{{{{H009} {