ICOM ID RP4010V D-Star Repeater

{ The repeater d-star icom id rp4010v at 144/430/1200 MHz for operation in mixed D-Star and analogical mode.  { thanks to the internal controller, the HF units can be used as single band D-Star / FM repeaters. { { (the controller of the ID-RP2C repeater is not required.) The operators of the repeater with limited internet resources can use the optional UX-262 LTE module to access the internet wirelessly. { { in combination with the Gateway Internet function, the repeater can be used wherever there is a radio LTE connection and therefore in the global network. {

* The DD mode is available only with the 1200 MHz ID-RP1200VD repeater. {

{ Integrated controller function { {{}
the D-Star ID-RP2010V / RP4010V / RP1200VD repeaters have an integrated controller function for units for units Hf. Each repeater can independently forward the signals received. { If the repeaters are connected with the Ethernet cable supplied, the cross-band operation is possible. {

compatible with the ID-RP2C repeater controller
The new D-Star repeaters are compatible with the ID-RP2C external repeater controller Use it with the controller mentioned above.

operation in dd mode (only id-rp1200vd) the dd mode offers data communication and internet access to 128 kil. Style = "font-size: 14px;"> the IC-9700 transceiver with its 1.2 GHz DD mode becomes a radio modem via the computer's ethernet door.

optional LTE module ux-262 for wireless IP connection by installing the optional LTE module it is possible to connect the repeater directly to an LTE* network* and through this to the internet. * the network coverage is provided by a SIM card available for free. for internet access a static global IP address.

simple internal gateway function in combination with the optional module with the optional module. And the simple internal gateway function, it is possible to quickly set up a position of repeater d-stor * temporary in an emergency situation. * before using an improvised repeater, check the local government regulations. {

{ { D-Star-DV / analog-fm-mischbetrie {{} {{{{{} in the mixed operation, D-Star-DV that analogue FM signals and forwards the signal received in the same mode. {

{ High performance operation
{{} using a high-performance amplifier, the D-Star repeater can transmit uninterruptedly up to 60 minutes and guarantees reliable operation with a transmission power of 25 W * for a long period of use. {
* 25 W for ID-RP2010V / ID-RP4010V, 10 W for ID-RP1200VD

{ {007 007} new FPGA platform and
scan {{} {{} direct RF {{{{{001 { The ID-RP2010V and ID-RP4010V repeaters use the RF direct scan method. The ID-RP1200VD repeater uses IF sampling at 1.2 GHz with a down converter. the processing of the signal takes place in the FPGA chipset, which eliminates the distortion and distortion of unwanted mixing that occur in the conventional SuperHet receivers. this improves considerably la sensitivity .

additional features rack assembly from 19 inches, two units of two units of Height, low profile | transmitter ID cw/vocal ID | < Style = "vertical-align: inherit; font-size: 14px;"> slots for sd memory card for updating the firmware, saving the settings data and the audio of the vocal ID in FM mode | entrance for reference signal to 10 MHz

accessories supplied: Ethernet (0.6 m) • USB cable (1 m) • fuses • rubber feet • Brugo key /fan> la