Acom 1000 linear hf and 50 mhz

The postena acom 1000 amplifier has a backlit LCD display showing text messages, one of 12 parameters and a bar graph for peak output power. Additional LEDs indicate various operating states such as “Operate”, attenuator and on/off The ACOM-1000 is fully BK (QSK) compatible, delivering 1000W of power on all amateur radio bands from 160m to 6m.

Technical Characteristics

• Frequency coverage: All amateur bands in the 1.8-54.7 MHz range, extensions or variations on request.

• Output power: 1000 W PEP or with continuous carrier, no operating mode limit.

• Intermodulation products: better than -35dB compared to nominal output level.

• Power frequency hum and noise: better than -40dB compared to nominal output level.

• Output harmonic suppression:

• 1.8-29.7MHz - 50dB better than nominal output level;

• 50-54MHz - 66dB better than nominal output level.

• Input and output impedance:

• nominal value: 50 Ω unbalanced, UHF type connector (SO239)

• input circuit: wide band, VSWR lower than 1.3:1, over the entire 1.8-54MHz range (no tuning or switching required)

• bypass path with VSWR less than 1.1:1, across the entire 1.8-54MHz range

• output impedance matching capability (antenna): with VSWR up to 3:1 or more at reduced power levels.

• RF Gain: 12.5 dB typical, frequency response less than 1dB variation (50 to 60 W drive power for rated output power).

• Mains power requirements: 170-264 V ac (200, 210, 220, 230 & 240 Vnominal, sockets for 100,110 & 120V on request), +10% -15% tol.), 50-60 Hz, single phase, 2000 VA.

• Complies with CE safety and electromagnetic compatibility requirements as well as FCC regulations (6, 10 & 12m bands blocked).

• Dimensions and weight: WxDxH: 422x355x182mm, 18kg.

• Operating environmental conditions:

• operating temperature: 0...+50 degrees Celsius;

• humidity: up to 75% @ +35 degrees Celsius.

• altitude:up to 3000m above sea level without derating or reduction in output power.

ITALY GUARANTEE