Hex6b 6 Bande Design Hexbeam G3TXQ

light and easy to install the bundle antenna (G3TXQ design) for portable activities. {

{

The Hex6b is a short wave bundle for the six groups 20, 17, 15, 12, 10 and 6m. The design follows the ideas of G3TXQ which was the first radio amateur to present this antenna. However, the mechanical construction was perfected by Eantenna with their long antenna engineering experience. The result is an efficient portable antenna for classic DX bands, which can be used due to its low weight also for DXPedes and holidays. {

{

The Hex6B works as two element beam on each band. Wires and ropes ready for use are fixed to the fiberglass uprights, no development is needed! Due to the mechanical tension of the sting of the bundle, it is stretched to it # s fixed dimension everything that time, there is no sag on the threads. The radiator dipoli are connected to the central vertical support, each has # S own screw terminals. The support center has been designed as a coaxial Balun transformer. This transformer is responsible for a very good match on each band, and the fact that only a power line is required for all bands. The gain is about 3 DBDs or rather, the front / rear ratio is between 13 and 22 dB. The adaptation transformer reaches a 1.5: 1 SWR or better in all bands except 10m, where SWR is 2: 1 or higher. Each band can be used for bandwidth without a tuner. The maximum allowed power is 5 kW. The fiberglass pipes are covered double against UV rays. {

The configuration of the Hex6b 6 band bundle is simple and can be made by a preson in approx. 30 minutes. For the installation of the 6 uprights are assembled and fixed to the central pole. Ready cut ropes from the upper part of the central pole for each upright are installed for the typical bent shape of Hexbeam. Then the Ready-Tagliati threads are fixed to the uprights, and electrically connected to the central pole. All the ropes and threads are already cut to size, no developed is needed. Thanks to the low weight of only 8.2 kg, Hexbeam can be installed on a light aluminum push-up tree. The rotation is made with a small 12v or hand rotor. {

{

download : { Hexbeam Hex6b Info Sheet (PDF, EN, 2.2MB)

technical data 11405 Hex6b

Amatori radio band 20, 17, 15, 12, 10, 6 m

Mass. 5 kW

Mass. of rolling 3.26 m

{ Weight 8.5 kg

measure (transport) 127 x 37 x 13 cm

earnings 20 m 3.8 dbd

{ 17 m 3.2 DBD

{ 15 m 3.5 DBD

12 m 3.0 DBD

10 m 3.6 DBD

6 m 3.7 DBD

front/back ratio 20 m 22 db

17 m 19 db

15 m 16 db

12 m 13 db

{ 10 m 16 db

{ { 6 m 18 db

{

bandwidth 20 m 350 kHz (SWR ≤ 1.5: 1)

{

17 m 100 kHz (SWR ≤ 1.3: 1)

{

{ 15 m 450 kHz (SWR ≤ 1.5: 1)

{

12 m 100 kHz (SWR ≤ 1.4: 1)

{

10 m 1400 kHz (SWR ≤ 2: 1)

{

6 m 500 kHz (SWR ≤ 1.5: 1)