Small.  Easy to handle.  Powerful.

The analyzer is designed to measure SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range from 100 kHz to 230 MHz.

The following tasks can be easily performed using this analyzer:

• Quick check-out of an antenna in the field or in fixed conditions.
• Tuning an antenna to resonance.
• Comparison of the characteristics of an antenna before and after a specific event (rain, hurricane, etc.).
• Measurement capacity or inductance of reactive loads.
•  

• Specifications techniques

  Range of frequency: from 0.1 to 230 MHz
  Entering frequency: 1 KHz resolution
  Size for 25" systems, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm
  SWR measurement range: from 1 to 100 in numeric mode, 1 to 10 in map modes
  R and

  • SWR, return loss, R, X, Z, L, C, single frequency magnitude and phase angle.
  • SWR graph, 100 points.
  • SWR graph on fixed HAM bands for IARU regions, 100 points.
  • Multé mode: to promptly control the multiband antenna.

  RF output:

  • Connector type: UHF (SO-239).
  • Output signal shape: square, 0.1 to 230 MHz.
  • Output power: -10 dBm (with 50 Ohm load).

  Energy:

  • One 3.7V lithium-ion battery, type 18650
  • When the analyzer is connected to a PC or a DC adapter with a USB plug, it draws power from these sources

  Interface:

  • 200 × 200 monochrome e-paper display
  • 2 × 3 keys on the waterproof keyboard
  • English menus and help screens
  • USB connection to a personal computer

  Bluetooth:  v.4.2 BLE Single Mode, Class B
  Dimensions:  185 mm x 40 mm x 33 mm (7.3 in x 1.6 in x 1.3 in)
  Operating temperature:  0… 40 °C (32… 104 °F)
  Weight:  185 g (6.5 Oz) with battery
  Warranty: 2 years
  GTIN-13: 4820185420259

  RigExpert Stick is produced in Ukraine.

  * All specifications are subject to change without notice or obligation.

  Inside the box

   

  • RigExpert Stick 230 antenna analyzer (with one 18650 lithium-ion battery)
  • Quick Start Guide
  • shoulder strap
  • USB cable