Elad TM-2 console for SDR receivers

Elad TM-2 Consul for SDR receivers

The TM-2 is a control unit for various SDR programs. It offers the operational comfort of a traditional radio combined with the modern technology of an SDR. {

The TM-2 control unit (previously known as TMATE-2) is connected to the computer via a USB cable. Depending on the software, it offers a variety of functions to which you are used to the normal front panel of a radio. For example, the enlightened color display shows the current frequency, the signal level, the operational way currently selected and much more. Six buttons are available for various functions, for example to select the operational way, the harmony field or to silence the receiver. Two small metal knobs are available and one large for the adjustment of the frequency, volume or Squelch. Each of the three knobs is also a button that can be used, for example, to switch the current function. Another advantage of the TM-2 is that SDR software can be used even if the computer is performing another program. {

The connection to the computer takes place via USB cable, the control unit uses the standardized hid method and therefore does not require drivers for current operating systems. The solid housing is in metal and therefore is firmly on the table. A USB cable is included in the supply. Power is supplied via USB, a separate power supply is not necessary. Dimensions 143 x 78 x 135mm, 45 ° inclined operating surface, weight 780g. {

Please note that the functioning of the TM-2 with some devices can request the installation of additional software, which is not included in the supply. The drivers and programs needed for TM-2 (e.g. TMate2CatControl) are available on the manufacturer's website. {

{ List of support programs/devices:

• {
• Fdm-Sw1 (Elad) [1] {
• Fdm-Sw2 (Elad) [1] {
• Perseo (mictelecom) [2] {
• sdr-raio console V2 [1] {
• Powersdr (Flex Radio) [2] {
• HPDDR Powersdr (Apache Anan-XX) [2] {
• Studio1 [1] {
• software n4py [1]
• and others ... {

[1] This program directly supports the TM-2 without additional programs.

[2] For operation with the TM-2, this program requires additional software that is not included in the supply and can be subject to pay. One of these is TMate2CatControl of Woodboxradio (free) and another is a virtual serial port emulator, which is usually available only for 64 -bit paid 64 -bit operating systems.

note well: the functions actually available of the TM-2 control unit depend on the SDR software used. Not all programs offer all the functions, the functions of the commands are not always freely definable.