Metropwr FX1 Wattmeter vector with 3 "OLED display and FX3 probe range of frequencies from 1.8 to 54 MHz, completely digital. The fast 32 -bit processor and the covering cover allow you to measure power (medium, PEP, DBM) and the SWR in real time. In addition to the VSWR, it is possible to determine various measurement values such as R, and x for each antenna. {
The front panel, with a very clear design, has a high -contrast 3.1 "OLED display to view the measured values. For the setting and operation of the FX1, only 4 softkey are available, positioned directly under the display.
The external Metropwr sensors can be installed up to 5 m away from the control unit. There are shortbone sensors up to 3 or 5 kW. The sensors are intended for internal use (they are not resistant to the weather) and include a directional coupling through which the measurement data is reported to the main unit. {
The FX1 device is provided with an FX-3 sensor for short waves and 6 m, which can be used to carry out measures up to 3 kW. It is equipped with PL connections and is simply connected to the antenna cable. {
Firmware updates can be installed through the integrated USB interface to benefit from any improvements. {