Manual and automatic HF touches
{{
{ The CG-3000 is a reliable automatic tuner for hf from 1.6 to 30mhz, for vertical, long wire, dipoli etc. as the well-known SG-230 This touched meletrine tuned filters or monopolies, the antenna connector is simply a high-viewing connector. coaxial, first connects the screen to the mass. The tuner has a range from 12 to 1000 Ω, max. Loading power: 150W. { {
Once the agreement has been found, it is stored in a non-favorable memory, so that a new agreement on a similar frequency will be very fast. The Tuner uses a Pi network that has the advantage (compared to the L) to act as a passa-low additional filter, reducing the emission of spuries. {
The cg-3000 tuner to 12V DC, other connection cables are not required. The sturdy plastic container is also suitable for external use, landing size. 365x240x75mm. The minimum length of the antenna is 2.5m for 6MHz frequencies and beyond, or at least 8m from1.8mhz and beyond. With a small fiber glass pole (not included) and a little thread (not included) you can build a good antenna for all bands. {
{
technical characteristics
- {
- { {003 003} Tantonable frequency: 1.8 - 30 MHz with 8 -meter long wire antenna {
- { Input impedance: 45-55 ohm {
- input power: 10 - 200 W Pep {
- ROS: & LT; 2: 1 {
- { Power voltage: 12V +/- 10% {
- { CONSUMPTION CONSUMPTION: & LT; 0.8 A {
- Automatic tuning time: ca. 2 seconds (first tuning) less than 1 second (return to memory frequency) {
- Memory channel: 200
- Weight: 1.8 kg
- dimensions: 310 mm x 240 mm x 72 mm (length - width - height)
- MPN
- 7438641839230
New
All product reviews comply with DIRECTIVE (EU) 2019/2161
No reviews
You might also like
Comments (0)