Microham Station Master

{ The microham station is the successor of the popular band-deCoder and offers many additional functions. Many devices of your shack are integrated with the Station: automatic switching of the antenna with freely programmable band decoder, direction of the computer controlled by the computer, Cat control of your radio, switching of past filters, a sequencer for amplifiers and, last but not less important, integration of your Antenna Steppir. With the ILINK connection you can further integrate your existing audio interface with Microham: it works with micro-Keyer, micro-Keyer2, Digi-Kyer, Micro-Keyer2R (+) etc.

{ Most of the control functions derive from the frequency and PTT information. This offers 20 exit switches dependent on the frequency to check an antenna switch (for example). Some antennas can be declared how to receive only the antenna, the station will block the transmission on these antennas. In addition, a freely programmable sequencer is available, for example to check the delayed switching of preamplifiers or amplifiers.

{ The intelligent control of the rotor allows the use of almost all producers and types of rotor. Position information can be an analogue tension (e.g. Yaesu, HY-Gain) or a digital impulse (eg spid). Depending on the band and individual configuration, the antenna lights up automatically, for example after inserting only the prefix of a call or locator (depending on the register program).

different fixed antennas can be grouped in a "virtual root", selecting the right antenna depending on the destination. This can be used with antennas such as 4-quadrats or drinks. {

with the controls clearly arranged by the station, practically all the functions can be controlled by the functions Frontal panel. This makes the operation independent of a computer, provided that the limits of the band and the configuration have been programmed previously.

the integrated cat interface allows you to connect almost all the radio to the computer and to the software of the software of register. Existing microham interfaces can be integrated with the Ilink Porta. The requested "ilink" cable (both sides 6d minidin, 1: 1) is included in the shipment. Complete a 10 optional MK-Keypad keyboard keys, see below.

features of the Station

• {
• General
• programmable controller for antenna, bpf, rotor and pa {
• winds (20) Programmable relay outputs
• integrated level converter for control door of the computer of the transceiver {
• decodes all the frequencies of the connected transceiver, including 75m, 6m, VHF and UHF
• Unlimited number of customized frequency segments defined? {
• Single USB connection to the computer {
• Autonomous operation {
• Internal control of the Rotorer {
• Virtual Rotators function {
• separate RX / TX support {
• Automatic antenna scan function {
• sequencer programmable separately up to 20 outputs {
• Automatic support of the Potenza amplifier {
• completely compatible and simple integrated with microham 'Keyers ?? MK, DK, CK, MKII and MK2R {
• owner support for tuning and automatic protection {
• Hot Switch protection with timing defined by the user {
• TX inhibits the support for Yaesu transceivers {
• Receive only the support for the antennas {
• optical insulation from the computer {
• keyboard or PS / 2 keyboard with double control of Station and Microham 'Keyer ?? {
• Inductance and filters integrated for maximum RFI immunity {
• Metal / aluminum case, powder and serigrafata painted {
• free, no firmware update / software of the time limit via the Internet

• {
• control cat {
• integrated level converter for Ci-V, Fif-232, IF-232 or RS-232 {
• up to 57600 baud with fake Handshake support {
• supports most of Elect, Icom, Kenwood, Ten-Tec, Yaesu and other radio

• {
• Antenna Control (Port A): {
• Ten (10) Programmable relay outputs {
• Configurable power for the Municipality
  • {
  • land {
  • 13.8 V positive {
  • external power supply, max. + 24V
  {
• compatible with all the switches of the remote antenna that use the common ground or positive control

• {
• Additional antennas or BPF control (Porta B): {
• six (6) Programmable relay outputs {
• Configurable power for the Municipality
  • {
  • land {
  • 13.8 V positive {
  • external power supply, max. + 24V
  {
• compatible with all automatic BPFs on the market

• {
• RX and TX sequencer antennas (Porta B):
• Four (4) Programmable relay outputs
• Both poles of the relay contact are available
• Independent settings of the early delay and tail for each output of the sequencer

• Internal control of the Rotorer:
• Three (3) Programmable relay outputs
• Both poles of the relay contact are available
• Configurable support for Brake or Speed ​​control
• Support for multi -mono roundabouts
• Support for Roofs with Analog Azimut Reading (Pot) or Discreet (Impulses)
• Programmable software fines
• Definition of the dead area
• Choice of the objective search strategy for optimal management
• Slipping support ?? Rotaters
• Four memories for the most sought after Azimuth
• Automatic Izimut control from the recorder

• virtual control of the Rotorer:
• The unlimited number of antennas can be combined with virtual rotator
• programmable Azimut intervals for each Virtual Rotator antenna
• Automatic Izimut control from the recorder
• Unlimited number of virtual roundabouts for band

• Power amplifier control:
• Automatic tuning for automatic amplifiers controlled by Ci-V (ICOM PW1, Expert Spe, Tokyo Hy-Power)
• Automatic switching of the band for amplifiers controlled by BCD (Yaesu VL-1000, FL-7000)
• Support for power amplifiers qsk

• weight and size:
• Weight 950 g
• 230 x 130 x 45 mm (without protruding parts)