RM Italy The 250V amplifier for 2m

{ The LA-250V is a 200W 140-150mHz amplifier, at 1 to 20W input (13.6v 30a). It uses 4 Mitsubishi RD70 Mosfet mounted on a copper heat diffuser (200x60x3mm). It is available in two versions, one with and one without top mounted fans. There is an external PTT input but it can also be used without incorporated cause HF-Vox.  {

The front panel is equipped with an LCD display that shows entrance power, output power, heat heat heat heat hallnown and VSWR output. There is the possibility to change the intensity of the backlight. The CPU keeps an eye on entry power, temperature and ROS and will possibly deactivate the amplifier to be transmitted in the event of a failure. Any errors will be recorded and will be available for the recall following diagnostic purposes by the manufacturer or distributors. The weight is about 4kg.  {

The dimensions are approximately 240x420x70mm for the non -fan version and 10 millimeters more than 80mm height, for the fan version. {

the La-250 is a 200W 140-150mHz amplifier, at 1 to 20W input (13.6v 30a). It uses 4 Mitsubishi RD70 Mosfets Mound on a Copper Heat Spreader (200x60x3mm). It is available in Two Versions One with and One Without Top Mound Fans. There is an external ptt input but it can be used also with two to the built-in hf-vox. {

The Front Panel Features an LC Display Which Shows Input Power, Output Power, Heat Sink Temp and Output VSWR. There is the skill to change the Intensity of the backlight. The CPU Keps An Eye on Input Power, Temperatures and VSWR and will if necessary disabled the amplifier from Transmitting if there is fault. Any Errors Will Also Be Recorded and Will Be Available for Later Recall for Diagnostic Purposes by Either the Manufacturer or his distributors. Weight is landing 4kg. {

dimensions are approximately 240x420x70mm for the non fan version and an extra 10mm of height, 80mm, for the fan version. {